GEMTEQ I/O 4. GEMCAN I/O Scanner Configuration
GEMTEQ I/O Technical Manual (T2031En)
Page 4-2
P-Table Value Description
Px+17
Module 1, Port B : Max. Output Data Delay mS (*2) See 4.2.7
Px+18
Module 1, Port B : Split Offset
Px+19
Module 1, Port B : Sync Period mS
Px+20
Module 1, Port B : Node Guard Period mS
Px+21
Reserved
Px+22
Reserved
Px+23
Module 1 : Table Letter, Node Data (Type)
Px+24
Module 1 : Table Offset, Node Data (Type)
Px+25
Module 1 : Table Letter, Input PDO Fault Data
Px+26
Module 1 : Table Offset, Input PDO Fault Data
Px+27
Module 1 : Table Letter, Output PDO Fault Data
Px+28
Module 1 : Table Offset, Output PDO Fault Data
Px+29
@CAF2 Module 2: Validity Flag
Px+30
Module 2, Port C : CAN Node ID
Px+31
Module 2, Port C : Baud Rate
Px+32
Module 2, Port C : Port Mode / Sub Mode
Px+33
Module 2, Port C : Master C/O Time mS
Px+34
Module 2, Port C : Max. Input Data Delay mS
Px+35
Module 2, Port C : Max. Output Data Delay mS
Px+36
Module 2, Port C : Split Offset (Must always be
zero)
Px+37
Module 2, Port C : SYNC Period mS
Px+38
Module 2, Port C : Node Guard Period mS
Px+39
Reserved
Px+40
Reserved
Px+41
Module 2, Port D : CAN Node ID
Px+42
Module 2, Port D : Baud Rate
Px+43
Module 2, Port D : Port Mode
Px+44
Module 2, Port D : Master C/O Time mS
Px+45
Module 2, Port D : Max. Input Data Delay mS
Px+46
Module 2, Port D : Max. Output Data Delay mS
Px+47
Module 2, Port D : Split Offset
Px+48
Module 2, Port D : SYNC Period mS
Px+49
Module 2, Port D : Node Guard Period mS
Px+50
Reserved
Px+51
Reserved
Px+52
Module 2 : Table Letter, Node Data (Type)
Px+53
Module 2 : Table Offset, Node Data (Type)
Px+54
Module 2 : Table Letter, Input PDO Fault Data
Px+55
Module 2 : Table Offset, Input PDO Fault Data
Px+56
Module 2 : Table Letter, Output PDO Fault Data
Px+57
Module 2 : Table Offset, Output PDO Fault Data
Rev.02 (10/10)
Summary of Contents for GEMTEQ I/O GEM80
