76
GB
LEK
Rökhylla
Rostertallrik
Gjutgodsbotten
Täckbitar
Brasbegränsare
Asklåda
Täljsten/keramik
Eldstadsbeklädnad
Plåtprofiler
Technical details
Output
3-9
kW
Efficiency, up to
80%
Weight, tall model
355 kg
Weight, medium high model
328 kg
Stove width
664 mm
Depth
560
mm
Height, tall model
2415 mm
Connecting sleeve (internal dia.)
150 mm
Type approved in accordance with:
European standard EN-13240 class 1
Swedish environmental and quality certification,
“P marked” cert. no. 22 03 07
Norwegian standard NS 3059, certificate no. 043-088
German standard DIN 18.891, RO-91 99 84
Danish standard 887-1, id nr 598
General information
This folder contains instructions on how to assemble and
install stoves in the Contura 470. The stove also comes with
comprehensive Lighting and Maintenance Instructions. Please
take time to read all this information carefully and keep it in a
safe place for future reference.
Contura 470 stoves have been type-approved in Sweden
for connection to a chimney which can withstand flue gas
temperatures of 350 °C. The connecting sleeve has an external
diameter of 150 mm.
To ensure proper combustion, sufficient air must be supplied to
the stove from outdoors.
Building permission
It may be necessary for you to apply for building permission
from your local planning authority before installing a stove or
erecting a chimney. Before start ing installation work, make sure
that you check which regulations apply.
Structural support
Check to make sure that the floor is strong enough to support
the weight of the stove and chimney. If you intend to locate the
stove on standard wooden floor joists, contact a professional
builder to make sure that the construction will withstand the
load. If the total weight of the stove and chimney together does
not exceed 400 kilos, it is not usually necessary to reinforce the
joists.
Floor plate
To protect the floor from sparks and falling embers the stove
must stand on a non-combustible surface which extends at
least 300 mm in front of the stove and 100 mm along each
side. As other statutory requirements apply in some countries,
we recommend that you consult the relevant authority or an
authorised chimney-sweep in your area.
Chimney
The draught in the chimney must generate a neg ative pressure
of at least 12 Pa. The draught is affected both by the length and
cross-sectional area of the chimney, and by how well sealed the
construction is. The shortest recommended chimney length is
3.5 metres. The cross-sectional area of the chimney must be
approximately 150–200 cm² (140–160 mm in diameter).
Make sure that there are no gaps around soot hatch es and flue-
pipe connections.
Remember that the draught is reduced in flues with sharp bends
or horizontal sections. A horizontal flue length of up to 1.0
metre is permissible, provided that the vertical flue is at least
5.0 metres in height.
It must be possible to clean the flue throughout its entire
length, and the soot hatches must be easily accessible.
Fire-bars
Ash-pan
Smoke baffle
Grate disc
Cast-iron fire-bed
Cover strips
Fire-box surround
Sheet metal profiles
292
292
664
340
1050
1600
Air inlet Ø64
Tall model 2415
Min. 2100 to ceiling