94
GB
LEK
LEK
Silicone
Glue the top tiles in the border to the stove body.
LEK
Place the pillars on the border top and ease
them into place so that they clip over the
metal tab in the hood seat. To protect the
border top, place a piece of paper between
the pillar and the top tiles in the border when
moving the pillar into place. Glue into place
with a bead of silicone between the top of the
border and the pillar.
Papper
Pl ttunga
LEK
Silicone
Fit four clips to each chimney side and the
chimney front. Note that the fixing holes
are not symmetrically placed on the sides
of the chimney but closer to the rear of
the stove.
Screw a metal clip into the top
hole on both pillars.
LEK
LEK
Hook the springs on the guide arms. If they have come loose
from their mounting on the inside, start by hooking them into
place there. Hold the spring so that innermost loop is perfectly
vertical. Move the spring in towards the hook, keeping the spring
supported by the body of the stove to the side and top. Test to
make sure that the spring has hooked in place. Then extend it and
fix it to the border frame.
Paper
Metal tab