MiniWarden Manual • 530-205-4520 • 3
1
READ AND FOLLOW ALL INSTRUCTIONS
2
SAVE THESE INSTRUCTIONS
3
WARNING
– To reduce the risk of injury, do not permit children to use
this product
4
DANGER
– Risk of injury
4.1 Replace damaged cord immediately.
4.2 Do not bury cord.
4.3 Connect to a grounded, grounding type receptacle only.
4.4 Do not use an extension cord.
5
WARNING
– This product is provided with a ground-fault circuit-
interrupter at the end of the power cord. The GFCI must be tested
before each use. With the MiniWarden on and operating, push the test
button on the GFCI and the MiniWarden should turn off. Now push the
reset button on the GFCI and the MiniWarden should now operate
normally. When the product fails to operate in this manner, there is a
ground current flowing indicating the possibility of an electric shock.
Disconnect the power until the fault has been identified and
corrected.
6
It is very important to follow the safety guidelines in this manual to
ensure safe installation and programming. Safety of any system
incorporating this equipment is the responsibility of the assembler of
the system. Upon installation, it is important to properly train all
personnel basic water quality management techniques, proper
operation and programming to anyone who operates or services
MiniWarden.
7
All applicable local installation codes and ordinances must also be
adhered to. Improper installation will create an electrical hazard
which could result in death or serious injury to pool users, installers
or others due to electrical shock, and may also cause damage to
property. The MiniWarden must be installed by a licensed or certified
electrician or a qualified pool professional:
7.1 United States: National Electrical Code (NEC), NFPA 70
7.2
Canada: Canadian Electrical Code (CEC), CSA C22.1.
IMPORTANT WARNING AND SAFETY INSTRUCTIONS
