ControlByWeb XW-110 User Manual Download | Manualshive

Page: 35 / 53

background image

XW-110™ WiFi Temperature Sensor Users Manual

Web Server

Include Temperature (XW-110-

Plus

only)

On Control Page:

Check this box to display the temperature measurements from this sensor on the

control page.

In Log File:

If logging is enabled (described above), check this box to include temperature

measurements from this sensor in the log file.

Email Option

Simple email messages can be sent in response to alarm conditions. This parameter is used to specify
what alarm conditions, if any, will cause email messages to be sent. Email notifications will work only if
email is correctly setup in the following settings.

Note:

Below is a list of options for the XW-110-Plus, similar options are available on the XW-110.

No email Messages:

No email messages will be sent due to alarm conditions.

Send email on Alarm 1:

Email notifications will be sent due to Alarm 1 conditions

Send email on Alarm 2:

Email notifications will be sent due to Alarm 2 conditions

Send email on Alarm1 and Alarm2:

Email notifications will be sent due to Alarm 1 or Alarm 2

conditions

Send email on Alarm1, Alarm2 and normal:

Email notifications will be sent due to Alarm1 or

Alarm1 condition or when Normal conditions are restored.

Remote Services

The XW-110 can be configured to send messages to other ControlByWeb™ products or servers that are
located at a remote location and running the remote services server software. This field specifies the
action taken due to a temperature alarm condition.

Note:

Below is a list of options for the XW-110-Plus, similar options are available on the XW-110.

No Action:

No action is taken.

Send state on Alarm 1:

state.xml will be sent when Alarm 1 occurs.

Send state on Alarm 2:

state.xml will be sent when Alarm 2 occurs.

Send state on Alarm 1 or Alarm 2:

state.xml will be sent when Alarm 1 or Alarm 2 occurs.

Remote Relay

Action

The XW-110 can be configured to control relays on other ControlByWeb™ products that are located at a
remote location on the network. This field specifies the action taken by the Remote Relay due to an
alarm condition. The following actions are available:

No Action

: No action is taken by the relay.

Turn On

: Turns the relay On due to an alarm condition. The relay will turn Off when alarm

conditions are no longer met.

Turn Off

: Turns the relay Off due to an alarm condition. The relay will turn On when alarm

conditions are no longer met.

Xytronix Research & Design, Inc.

Page 35

«
...
33
34
35
36
37
...
»

Summary of Contents for XW-110






















































Reviews:

No comments

Related manuals for XW-110

Brand: Garland Pages: 36

Brand: 4MOMS Pages: 20

Brand: RACLET Pages: 48

Brand: RACLET Pages: 31

Brand: Racelogic Pages: 2

Brand: YachtSafe Pages: 2

Brand: SRC Pages: 5

Brand: Mobis Pages: 16

Brand: Mightymast Leisure Pages: 5

Brand: Wagan Pages: 8

Brand: ADIC Pages: 6

Brand: Thermo King Pages: 2

Brand: GROTHE Pages: 36

Care@Home MDsense

Brand: Essence Smartcare Pages: 12

5TH GEN 4RUNNER

Brand: Victory 4x4 Pages: 5

Brand: Keith Pages: 2

Brand: Chamberlain Pages: 4

Brand: Gira Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands