XW-110™ WiFi Temperature Sensor Users Manual
Web Server
MANUAL TIME CONFIGURATION
Date:
The current date is entered by first selecting the correct month and year, using the left and right arrows
at the top of the calender. The single arrows(< and >) change the month and the double arrows (<< and
>>) change the year. Once the current month and year are displayed, select the correct day, which will
then be highlighted.
Time (24-Hour Format):
Enter the time as HH:MM:SS. (HH represents hours in 24-hour format [00-23], MM represents minutes
[00-59], SS represents seconds [00-59].)
SYNC WITH NPT SERVER
Server Name/IP Address
This field is used to specify the name or IP address of the NTP server. If a name is specified, a
working DNS server address must be entered into the Network settings. If the IP address is
specified, it should be entered in the following format aaa.bbb.ccc.ddd where each of the letters
represents a number between 0 and 255. This field can be up to 40 characters. There is no default
value for this field.
Many NTP Internet servers are available. In addition, many desktop computers will function as an
NTP server (both Mac and PC). If a desktop computer is used, firewall settings may need to be
adjusted to allow for NTP communications on UDP port 123.
Public NTP servers can be found at
. Some of these are listed below.
US Servers (
http://www.pool.ntp.org/zone/us
):
Xytronix Research & Design, Inc.
Page 29
XW-110 Plus Only
Summary of Contents for XW-110
Page 1: ......