XW-110™ WiFi Temperature Sensor Users Manual
Web Server
Email on AC Power Fail (XW-110-Plus only)
When enabled, the XW-110-
Plus
will send a status email when it detects loss of the +5V input power
source. This feature only works if batteries are installed and power to the access point and internet is still
available. Another power loss email will not be sent until power has been restored for a period of time.
EMAIL SETTINGS
SMTP Server
The SMTP mail server host name. To save energy, DNS lookups are only performed the first time after
the settings are submitted, or after a failure to send an e-mail.
SMTP Server Port
The port number of the SMTP mail server. This is generally 25 for non-encrypted SMTP servers. If using
SSL/TLS, this port number is generally 465.
SSL
Check this check box if the server and port you have configured is expecting a SSL connection.
User Name
Email user name (if required).
Password
Email password (if required).
Return Email
The emails address that will get notification if the sent email does not get sent.
Email 1-3
When an alert occurs an email message is sent to these addresses.
Email Length (XW-110-
Plus
only)
Full Message
includes all sensor data in the email alert.
Short Message
only includes the status of the
temperature that triggered the email alert to be sent. Short messages can be easier to read when sent to
cell phones as text messages.
Test Email
Pressing this button will submit any changes to the email settings and trigger an alert email to be sent to
the configured email addresses.
The result of the test email will be displayed directly below the Test Email button along with the last
message received from the SMTP server (if applicable).
The following are typical responses you may see along with a description of what they mean:
•
Error initiating communications: Did not receive the expected HELO from SMTP server. Ensure
you are using the proper port and host/IP settings.
•
Error with EHLO: Error sending or error receiving proper response to the SMTP EHLO
command. Server may be unavailable or port and IP address settings are not correct.
•
Error authenticating: Error sending or error receiving proper response to the SMTP AUTH
PLAIN command. This may indicate the use of an incorrect username or password.
Xytronix Research & Design, Inc.
Page 23
Summary of Contents for XW-110
Page 1: ......
