Unidrive M200/201 Control Quick Start Guide
47
Issue Number: 3
Ready to run
Run
The drive is now ready to run the motor.Close the Run Forward
or Run Reverse terminals on Unidrive M200; press keypad Start
button on M201.
Increasing and
decreasing speed
Changing the selected Analog frequency reference (
Speed Ref
Potentiometer
on M201) will increase and decrease the speed
of the motor.
Stopping
To stop the motor by following the selected deceleration rate,
open either the run forward or run reverse terminal on Unidrive
M200; press keypad Stop button on M201. If the enable
terminal is opened while the motor is running, the drive output is
immediately disabled and the motor will coast to a stop.
Action
Detail
