ARCHITECTURAL AND ENGINEERING SPECIFICATION, v 2.7
39
6.
Arming and Disarming (Manual Control):
a. The operator will be able to Arm/Disarm any Napco panel area from
the CardAccess 3000 Manual Control menu.
II.
CCTV Remote Control:
1.
Generic Control:
The system shall support any CCTV switching system that
accepts RS232 ASCII commands through a serial connection.
2.
Configuration:
The system software shall allow the transmission of at least one
80 character ASCII text string, onto a CCTV control device, via an RS232 port on
the workstation.
3.
Assignment:
Each input and door within the system has the option of
transmitting a unique user defined control string of up to 80 characters, onto a
CCTV control device.
JJ.
Full DVR/NVR (Digital Video Recorder) System Integration:
1. CCTV Digital Video Management System Hardware shall be a fully configured,
turn- key system available from Continental Access.
2. The Digital video management system must be fully integrated into the
CardAccess 3000 system, allowing full viewing and playback from any of the
selected CardAccess 3000 workstations. The digital video management system
shall be able to perform all viewing, playback and video storage functions
simultaneously.
3. The system shall allow video to be displayed on the same CardAccess 3000
monitor, and configuration can be performed with standard mouse and keyboard.
The Digital video management shall be able to be configured using an interface
application in CardAccess 3000 and shall allow recording of video either
continuously or only during alarm events, or only while activity is present. Each
camera will be able to record in different modes and on different schedules.
4. The system shall allow for time synchronization between the DVR Server and
CA3000 Workstation PC’s.
5. The Continental IView shall support IP address based cameras.
6. The system shall allow remote connections over LAN/WAN between all of the
CardAccess 3000/CCTV DVR workstations, allowing full viewing and control of
any of the Digital Video Recording servers.
7. The Digital video management system shall provide RS-485 or RS-422
communications for controlling compatible PTZ/dome devices from various
manufactures. These devices will be controlled through the local or remote user
interface in support of the system.
8. The system shall allow local and remote retrieval of video. User-defined
parameters will allow searches by camera and based on the following:
