ARCHITECTURAL AND ENGINEERING SPECIFICATION, v 2.7
29
b.
Browse Mode:
Once the user has logged in, the system shall
automatically put the Events grid in Browse. This mode will ‘freeze’ the
event screen for browsing.
c.
Previous/Next:
When sorting on a header there will be two buttons
(PREVIOUS) and (NEXT). The Previous button will display the
previous day’s transactions. The Next button will advance you to the
next day’s events.
d.
Photo/Map:
If the Photo/Maps option is enabled, the system should
automatically display each user’s photo and/or map.
7. Each alert record will provide the following information:
a. Class, Description, Location, Date, Priority, Operator that
acknowledged the alert and the time it was acknowledged either
through the ACS software or the ACS stand alone map software
directly on the Map.
8.
Alarm Description:
Each alarm point may be defined with a plain text
description of up to 40 characters.
9.
Alarm Enabling:
Alarm points will be enabled during user-definable time
schedules and they can be manually silenced from any workstation.
10.
Additional Alarms:
The system shall also generate alarms for the following:
a. Enclosure tampering
b. Access Control Panel communication loss/restore
c. Alarm tampering (supervised)
d. Alarms shall be capable of utilizing events generated by the ACS
software.
11.
Alarm supervision:
When using supervised alarm points, the system shall
monitor for “OPEN”, SHORT”, and “GROUND FAULT” in addition to
NORMAL/ABNORMAL conditions.
12.
ASCII Output-CCTV Remote Control
a. Alarm points will have the capability to output an ASCII text command
for CCTV switched interface.
b. This command/output will be user-definable and transmitted on alarm
points going into abnormal state, returning to a normal state, or both,
and for specified reader events as well.
13.
Maps/Floor Plan Assignments
a. The system operator will be able to choose to assign a floor plan to
each alert/ event. This floor plan will help in showing the exact location
of the event. The system shall be capable of displaying these floor
plans automatically or manually by the operator.
b. If the event is a badge event, in addition to the floor plan, the system
will be able to automatically or manually display an image of the badge
holder both from the database and live from the CCTV interface.
