ARCHITECTURAL AND ENGINEERING SPECIFICATION, v 2.7
25
•
Alarm Inputs Group
•
Relay Outputs Group
•
Links (If Than) Macros type Group
•
Access levels Group/Groups
•
Time Schedules Group
•
DVR’s/CCTV
•
Napco panels
D.
Vehicle Tracking:
1. The system shall support tracking the use of a vehicle by a particular operator.
2. The system administrator will be able to link a particular vehicle to a particular
vehicle operator.
E.
Event Printing:
The system shall support printing of alerts or any events above a user
selected priority.
F.
Printer Types:
The system shall be capable of supporting three types of printers.
1.
Report Printers:
Reports requested by the operators will be sent to these
printers. These printers may reside anywhere on the network.
2.
Event Printers:
Individual events will be routed to any of the event printers in
real time.
3.
Dye-sublimation Video Badging type of printer:
These can be single/double
sided printers. The system software shall support many different printer driver
manufactures, and will be compatible with any of the following Continental
Access printer models:
G.
Scheduled Reports:
1. The system shall be capable of running unattended scheduled reports,
automatically. Operator intervention shall not be required.
2. The system shall support the creation of report templates. These templates will
be saved by the system for repeated retrieval and use by the system operators.
H.
Badge Validator (Enable/Disable):
1. The system operator will be able to program a reader as a ‘Badge Validator
reader. Badges presented to this reader are automatically enabled or disabled on
consecutive card swipes.
I.
Auto Acknowledge Priority Set Point:
1. The system operator will be able to set a priority level between 1 and 99 as an
automatic acknowledge point.
2. All alerts that have been assigned a priority lower than the set point will be
automatically acknowledged by the system.
3. The system operator will be able to easily modify this set point as well as, enable
or disable it.
