Contec PT-E831H, User Manual

Page: 104 / 123

8. BIOS Setup
PT-E831H, PT-E831HS User’s manual
97
OnChip IDE Device
Phoenix - AwardBIOS CMOS Setup Utility
OnChip IDE Device
Item Help
IDE HDD Block Mode [Enabled]
On-Chip Primary PCI IDE [Enabled]
IDE Primary Master PIO [Auto]
IDE Primary Slave PIO [Auto]
IDE Primary Master UDMA [Auto]
IDE Primary Slave UDMA [Auto]
*** On-chip Serial ATA Setting ***
On-Chip Serial ATA [Enabled]
Menu Level
44
If your IDE hard drive
supports block mode
select Enabled for
automatic detection of
the optimal number of
block read/writes per
sector the drive can
support
↑↓→←:Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Figure 8.9 On Chip IDE Device
Table 8.9 On Chip IDE Device Selections
Description Choices
IDE HDD Block mode
Block mode is also called block transfer, multiple commands,
or multiple sectors read/write. If your IDE hard drive
supports block mode (most new drives do), select Enabled for
automatic detection of the optimal number of block
read/writes per sector the drive can support.
On-Chip Primary PCI IDE
The integrated peripheral controller contains an IDE
interface with support for 2 IDE channels. Select Enabled to
activate each channel separately.