Contec PT-E831H, User Manual

Page: 99 / 123

8. BIOS Setup
92
PT-E831H, PT-E831HS User’s manual
Advanced Chipset Features Setup
Phoenix - AwardBIOS COMS Setup Utility
Advanced Chipset Features
Item Help
DRAM Timing Selectable [By SPD]
x CAS Latency Time 3
x DRAM RAS# to CAS# Delay 3
System BIOS Cacheable [Enabled]
Video BIOS Cacheable [Disabled]
** VGA Setting **
PEG/Onchip VGA Control
[Onchip VGA]
On-Chip Frame buffer size [ 8MB]
DVMT Mode
[DVMT]
DVMT/FIXED Memory Size [ 64MB]
Boot Display [CRT+LVDS]
Panel Type [LVDS]
Boot After SWON
[Non-Boot]
Menu Level
4
↑↓→←:Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Figure 8.7 Advanced Chipset Features Setup
This section allows you to configure the system based on the specific features of the installed chipset.
This chipset manages bus speeds and access to system memory resources, such as DRAM and the
external cache. It must be stated that these items should never need to be altered. The default settings
have been chosen because they provide the best operating conditions for your system. The only time you
might consider making any changes would be if you discovered that data was being lost while using your
system.
Table 8.7 Advance Chipset Feature Selections
Description Choices
DRAM Timing Selectable
The value in this field depends on performance parameters
of the installed memory chips (DRAM). Do not change the
value from the factory setting unlees you install new
memory that has a different performance rating than the
original DRAMs.