Contec PT-E831H, User Manual

Page: 33 / 123

4. Each Component Function
26
PT-E831H, PT-E831HS User’s manual
Giga bit-Ethernet : LAN 1 – 2
This product is equipped with 2 ports for giga bit.
- Network
type : 1000BASE-T/100BASE-TX/10BASE-T
- Transmission speed * : 1000M/100M/10M bps
- Max. network path length : 100 m/segment
- Controller : Marvell 88E8053
Table 4.3 Giga bit-Ethernet Connector
Function
Pin No.
100BASE-TX 1000BASE-T
1 TX+ TRD+(0)
2 TX- TRD-(0)
3 RX+ TRD+(1)
4 N.C. TRD+(2)
5 N.C. TRD-(2)
6 RX- TRD-(1)
7 N.C. TRD+(3)
LAN
8 N.C. TRD-(3)
LED LEDs for display of network statuses
Left LED
: Link LED
Green ON, Operation: Green Blinking
Right LED : Operation LED
10M: Off, 100M: Green, 1000M: Red
LAN drivers
Install the appropriate LAN driver for your OS from the CONTEC’s Web site [IPC-SLIB-01].
(For information on the latest version of IPC-SLIB-01, check the CONTEC's web site.)
CAUTION
When using both 2 ch Ethernets in 1000 BASE -T, please use PT-E under the environment where the
operating ambient temperature is "Front display section is 0°C to 40°C, other than display section is
0°C to 45°C".