Contec PT-E831H, User Manual

Page: 47 / 123

5. Startup and Termination
40
PT-E831H, PT-E831HS User’s manual
Point
(1) In case of using a CF card, executing write-protect to the CF card may reduce access number of times
to the CF card; and it also may reduce risk that corrupts data in the area where write-protect has been
executed.
(2) In case of not using resume function, if turns on the power right after switching off, please wait more
than 10 seconds before switching it on again.
(3) In case of using resume function, PT-E’s operation state will be shifted to [Continue Mode] or
[Standby Mode] after switching off power of PT-E. Within the setting time that has been set in EPC
System Monitor, PT-E operates in either [Continue Mode] or [Standby Mode].
PT-E’s operation state can be confirmed by operation state LED on the back of PT-E. (Refer to p.20)
Do not remove CF card during the operation state LED lighting on.
Doing so can lose data or damage the CF card.
(4) Do not operate the power ON/OFF switch near the CF card slot during operation state LED lighting
on or blinking. Doing so can lose data or damage the CF card.