Contec PT-E831H, User Manual

Page: 64 / 123

6. Setting the Touch panel Driver
PT-E831H, PT-E831HS User’s manual
57
Advanced
Used to do advanced settings, including touch action, beep etc.
(5)
(6)
(7)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(1)
(2)
(3)
(4)
(1)
(2)
(3)
(4)
Figure 6.20 Advanced tab
(1) Sample rate
Determine the percentage of pointer device data packets that are passed on to the mouse driver. This
should normally be set to 100%.
(2) Touchdown filter
Specify the initial number of touch packets before sensing a touchdown.
(3) Sound pitch
Set the frequency of the beep.
The bigger the setting value is, the higher the beep becomes.
(It becomes maximum volume near setting value 2000 from the buzzer characteristic.)
(4) Sound duration
Sets the length of the beep.
The bigger the setting value is, the longer the beep becomes.
(5) Check items
1) Swap X/Y
Normally, the cursor appears in the XY coordinate position touched on the screen. However, the
cursor can be displayed in the position opposite to the XY coordinate position touched.
2) Enabled
Check the checkbox to make touch operation available. When doing the touch operation, don’t
remove the checking.
3) Initialize
Indicates that the device’s initialization macro, if it exists, it will be executed.
4) Sound
Enables or disables the Sound option that accompanies simulated button presses.