51
button. If the solution does not
help, contact the
supplier/manufacturer.
FAULT: SENSOR
light flashes yellow
and red
Malfunction of at least one
sensor – extinguishing
works
RESET the device via the web
interface, in the Status menu
click the Sensors signaling
wheel, then the Reset sensors
button. If the solution does not
help, contact the
supplier/manufacturer.
VALVE light is red
Malfunction of one of the
valves
If the FAULT PRESSURE light
is not red, use the RESET device.
If the FAULT PRESSURE light
is red, there has been a drop in
pressure, contact the
supplier/manufacturer. If the
solution does not help, contact
the supplier/manufacturer.
FAULT: SYSTEM
light is red
Majority error, when the
system does not have to,
but can extinguish (a small
amount of fire extinguisher)
In the web interface of the Status
menu, click on the System
signaling wheel for error details.
FAULT: SYSTEM
light is yellow
A minor error that does not
prevent active
extinguishing.
In the web interface of the Status
menu, click on the System
signaling wheel for error details.
FAULT: AC MAINS
light is red
AC fault, AC failure,
interrupted supply
The device is powered by
batteries at this stage. Check the
power cable connection to the
device or if there is a physical
break somewhere along the way.
BATTERY light
flashes red
The battery is missing, the
leads from the battery are
disconnected.
Contact supplier/manufacturer.
Service is required.
BATTERY light
flashes green
The battery is in the system,
the leads from the battery
are connected, but it is not
electrically connected to the
system.
To connect the batteries, insert a
thin pin into the hole located to
the left of the network cable
input, then press the button till
the light goes green
BATTERY light is red Battery failure.
Fault reset - "RESET" button.