43
EXTINGU
ISHING
R
S50
%
After 3 seconds, an extinguishing command
accompanied by an acoustic signal will occur. The
sound signal can be turned off with the "MUTE"
button. After extinguishing, the smoke detector
remains activated and must be deactivated with the
"RESET" command
EXTINGU
ISHING
R
S
By switching on "RESET" the system recovery
operation is in progress.
SYSTEM
READY
EXTINGU
ISHING
R
R
B
S
After completing the system recovery process by
resetting, the system is ready for normal operation.
The state is signaled.
EXTINGU
ISHING
SYSTEM
READY
BATTERY
---
G
G
---
B
S
If we deactivated the siren with the "MUTE" button,
it is necessary to press the "MUTE" button again to
turn on the siren. The “MUTE” indicator will go
out.
MUTE
Y
---
S
---
D
E
V
I
C
E
S
H
U
T
D
O
W
N
Battery
disconnection
If the device was disconnected from the supply for a
longer period of time, the batteries would gradually
discharge. For this case, it is necessary to
electrically disconnect the batteries from the system.
Disconnecting can be done in two ways:
- by simultaneously pressing the "TEST" +
"RESET" buttons
- by turning on the microswitch in the lower left part
of the cabinet, which is accessible from bottom of
the device after partially sliding it out from inside of
the cabinet (approx. 5 cm)
BATTERY
G
S50%