27
○
Alarms
Figure number 26 – Alarm setting example
Select alarm: choose the alarm you need to edit.
SEP: displays status of the alarm.
Zone settings:
#sensors: number of simultaneously triggered sensors for extinguishing activation
F. sensor1-6: checked, if the sensor belongs to the selected zone
Notification settings:
Text: description of the alarm to be displayed in the log and SNMP protocol
Trap: status change or fault will send a trap.
Mail: status change or fault will send an email.
Error Major: fault will be displayed as major system fault.
Error Minor: fault will be displayed as minor system fault.
State Major: change of state will be displayed as major system fault.
State Minor: change of state will be displayed as major system fault.
Extinguishing: checked status will activate extinguishing.
Blocking: checked status will block extinguishing.
Relay 1-4: checked status activates relay switches.
Inv. relay: relay inversion
Inv. status: state inversion
Ext. delay: delay of extinguishing in seconds. The sensors must remain active until the
extinguishing begin – only for extinguishing notifications.
NOTE: available settings vary depending on the alarm selected
.