Contec IPC-BX/M560, User Manual

Page: 43 / 90

BIOS Setup
IPC-BX/M560(PCW)
32
IDE Primary Slave UDMA : Set the UltraDMA mode of the
slave drive connected to the IDE
primary connector (CN1). Usually,
set this item to [Auto].
IDE Secondary Master PIO : Set the transfer rate (PIO mode) or
IDE Secondary Slave PIO UDMA mode of the master/slave
IDE Secondary Master UDMA drive connected to the IDE IDE
Secondary Slave UDMA
secondary connector (CN2).
Usually, set these items to [Auto].
On-Chip Primary PCI IDE : Select whether to use the internal
primary IDE controller. Usually,
set this item to [Enabled].
On-Chip Secondary PCI IDE : Select whether to use the internal
secondary IDE controller. Usually,
set this item to [Enabled].
* Setting this item to [Disabled]
makes interrupt IRQ15 available
to the user.
USB Keyboard Support : To connect the keyboard to a USB
port, set this item to [Enabled].
Onboard FD Controller : Select whether to use the internal
FD controller. Usually, set this
item to [Enabled].
Onboard Serial Port 1 : Set the port address and IRQ for
internal serial port 1.
Onboard Serial Port 2 : Set the port address and IRQ for
internal serial port 2.
UART2 Mode : This item is not used on this
machine. Leave it set to
[Standard].
Onboard Parallel Port : Set the port address and IRQ for
the internal parallel port.