Contec IPC-BX/M560, User Manual

Page: 14 / 90

Overview
IPC-BX/M560(PCW)
3
2. Overview
Specifications
Table 2.1. Function Specifications
CPU MMX Pentium 266MHz (Intel)
Chip Set 430TX (Intel)
L2 Cache 512KByte PB-SRAM
Main 144 pin SO-DIMM socket x 2 (Memory modules are optional.)
Memory Up to 256MB (Initially none).
3.3V 144pin SDRAM type SO-DIMMs are acceptable.
BIOS ROM 128KByte E0000H~FFFFFH (AWARD)
Controller 69000 (Chips & Technologies)
Video RAM 2MByte
Video BIOS 40KB (C0000H to CFFFFH) or 32KB (C0000H to C7FFFH)
CRT I/F 15pin HD-SUB connector
640 x 480/800 x 600 (16M Color), 1024 x 768 (65K Color), 1280 x 1024 (256 Color)
LCD I/F TFT color LCD: 6bits for R/G/B signals, respectively
Dedicated 50pin half-pitch connector (CONTEC flat panel display acceptable)
FDD I/F Dedicated 26pin half-pitch connector 2 mode (Optional FDD: PC-FDD25BH)
IDE HDD I/F Capable of incorporating one 2.5inch IDE HDD or silicon disk drive (Drives are optional.)
RS-232C (general-purpose): 2channels (serial ports 1 and 2) with DB-9 connectors
RS-232C (touch panel): 1channel (serial port 3) [in the LCD connector] *1
RS-422/485 (general-purpose): 1channel (serial port 4) [in the RAS connector]
Parallel interface Centronics-compatible bidirectional DB-25 connector
I/F --- Ethernet 100Base-TX/10Base-T RJ-45 connector ---
Controller --- 21143 (Intel) ---
USB I/F 2ch
Keyboard interface PC/AT keyboard compatible (6pin MINI DIN connector)
Mouse interface PS/2 mouse compatible (6pin MINI DIN connector)
Photocoupler insulation type: 3 input and 3 output channels
(Note that one output channel and one input channel are switched for use as a
WDT external output and remote reset input, respectively.)
WDT: 10ms to 300s (RESET or NMI + external output enabled at a time-out)
Remote reset: External input signal
Slot PCMCIA Type I/II x 2 PCMCIA Type I/II x 2
or Type III x 1 or Type III x 1
Controller RL5C476A (RICOH) RL5C476A (RICOH)
PCI/ISA shared slot x 2
Maximum acceptable
board length: Max. 200mm
RTC/CMOS Backed up by a lithium battery whose lifespan is at least 10 years.(25ºC)
Power supply
Rated Voltage
100-240VAC (Continuous Input), 50/60Hz
Main Body 40VA 45VA
LCD *3 25VA
Expansion Slots 45VA
Total 65VA 115VA
+5V: 2A
-5V: Not supplied
+12V: 0.5A -12V: 0.1A
Outside dimensions (mm) 262(W) x 230(D) x 62(H) 262(W) x 230(D) x 140(H)
Weight 3.3kg 4.7kg
*1 Used for the CONTEC touch panel display. (See "Options List" for the applicable product.)
*2 The PC cannot be booted from the PC card. CARD-BUS and ZV Card not support.
*3 Used for Flat panel display IPC-DT/L30S(PC)T.
IPC-BX/M560(PCW)CP
Expansion board supplied
power capacity
---
Model IPC-BX/M560(PCW)EP IPC-BX/M560(PCW)C IPC-BX/M560(PCW)E
---
Memory
Video
PC Card *2
---
---
RAS functions
---
Maximum
Power
Consumption
Expansion board slots
Serial interfaces
LAN
General-purpose
input / output