—
Set the Computer Network
—
CPSA-PCB100 Reference Manual
—
29
—
Example setting of the connecting cable and CPS-COM-2PD
Setting of the connecting cable and CPS-COM-2PD is dependent on the PLC to which you are
connecting.
Cable Connection
Pin assignment
CPS-COM-2PD
Pin Number Signal Name
Description
1
GND
Signal ground
2
RxD +
Received data (+)
3
RxD -
Received data (-)
4
TxD+
Transmitted data (+)
5
TxD -
Transmitted data (-)
Full-duplex Setting
Data Transfer Mode
Setting
Full Duplex
SW3 sets the mode for channel 1, SW4 for channel 2.
Terminator Setup
Setup when using the internal terminator
SW1 sets the mode for channel 1, SW2 for channel 2.
CPS-COM-2PD
1
ON
2
3
4
SW3
SW4
5
6
- Self-loop RTS, CTS
RTS
CTS
CPS-COM-2PD
1
ON
2 3 4
SW1
SW2
