—
PLC-Backup
—
CPSA-PCB100 Reference Manual
—
69
—
3.
Configure PLC Setup (Battery)
1
Refer to
menu
(Page47)
to start Web browser.
2
From “PLC-Backup” menu, select [PLC Communication Setup] – [Edit] and move on.
The page below [Edit] appears.
(This is the page to set the PLC battery information. [Page Switch] – [Battery])
3
In Battery page, you need to enter the “Battery information” corresponding to the number of
PLCs to be connected.
4
In “Current Value”, the PLC and the Battery Replacement Day currently set are displayed.
5
Enter the battery replacement day in “Input Value” in accordance with PLC.
6
Click the “Register” button to confirm the information.
7
When the settings have been confirmed, the message “Registration completed” appears in the
message field.
* All of the settings will be deleted if you click the “PLC Switch(1-5)” button, “Page Switch(Basic,
Area, Battery)” button, or “Return” button and go back to the previous page before confirming
the settings by clicking the “Register” button.
Also, bear in mind that the page will disappear if you click the “
←
“ button on the browser.
