—
PLC-Backup
—
CPSA-PCB100 Reference Manual
—
64
—
2.
Configure Battery Replacement Cycle
1
Refer to
menu
(Page47)
to start Web browser.
2
From “PLC-Backup” menu, select [System Setup] – [Edit] and move on.
The page below [Edit] appears.
3
In “Battery Replacement Cycle • Current value”, the battery replacement cycle currently set is
displayed.
4
Select PLC type connected with the product from “PLC type”.
5
Number of selected PLC type is displayed in the ”PLC Type • Input Value”.
6
Click the “Register” button to confirm the selected PLC type.
7
When the settings have been confirmed, the message “Registration completed” appears in the
message field.
8
Click the “Return” button to go back to the [System Setup].
*If you click the “Return” button and go back to the previous page before confirming the settings
by clicking the “Register” button, all of the settings will be deleted.
Also, bear in mind that the page will disappear if you click the “
←
“ button on the browser.
