Contec AD16-64(LPCI)LA, User Manual, Page: 35 / 83

3. External Connection
28
AD16-64(LPCI)LA
Each terminal block accepts the following ranges of channels.
Connector at
board side
connection
destination
Analog input
Analog input
control signal
*1
Digital input
Digital output Counter I/O *2
Single-ended
input
Differential input
EPD-96A
EPD-96
EPD-68A
DTP-64
Only CNA is
used.
channel 0 - 31 channel 0 - 15
Ο Ο Ο
Only CNB is
used.
channel 32 - 63 channel 16 - 31 -- -- --
CNA/B is
used *3
channel 0 - 63 channel 0 - 31
Ο
*4
Ο
*4
Ο
*4
ATP-32F
Only CNA is
used.
channel 0 - 31 --
Ο
Ο Ο
Only CNB is
used.
channel 32 - 63 -- -- -- --
CNA/B is
used *3
channel 0 - 63 --
Ο
*4
Ο
*4
Ο
*4
ATP-8
Only CNA is
used.
channel 0 - 7 --
Ο
Ο Ο
Only CNB is
used.
channel 32 - 39
*5
-- -- -- --
CNA/B is
used *3
channel 0 - 7,
32 - 39 *5
--
Ο
*4
Ο
*4
Ο
*4
*1 : AI External Start Trigger Input, AI External StopTrigger Input, AI External Clock Trigger Input
*2 : Counter Gate Control Input, Counter Up Clock Input, Counter Output
*3 : Two sets of terminal blocks and optional cables are required each.
*4 : Make wiring on the CAN side.
*5 : Two or more only of channel 32 - 39 sampling cannot be done.
Figure 3.2. Connecting example of option
AD16-64(LPCI)LA
PCA68PS-**P
ADC-68M/96F
PCB68PS-**P
Option Cable
Option Cable
Option Cable
Screw Terminal (M3.5 x 96P, M3 x 96P)
EPD-96, EPD-96A
Screw Terminal (M2.5 x 96P)
DTP-64(PC)
BNC Terminal Unit
(analog input 32ch)
ATP-32F
BNC Terminal Unit
(analog input 8ch)
ATP-8
Termination Panel
Screw Terminal (M3 x 68P)
EPD-68A
Termination Panel