Step 14: Onto the case and buttons. Here we will drill the holes needed for the
buttons and secure them in place.
• Drill holes using your drill bit in the spots indicated or where ever you would like to have your buttons. We
prefer keeping them out of the way because you will only need to press them to change modes.
•
Next take your buttons and we are going to remove one pair of legs from each
because we only need one pair. Use the image to the right so you know which
legs to remove.
• Next use hot glue to secure the buttons in place. Do not attempt to use super glue
or other adhesives as it will soak into the button mechanism and cause it to stop
working. Once the buttons are secured in place bend the two legs out flat away from
the button.
REMOVE
Drill holes here
