PROGRAMMING THE RAPID FIRE
Each Rapid fire Mode can be Programmed to one of 50 different speed in-between 4 shots per second and 50
shots per second. You can also set the Burst fire for each mode from 2 – 10 shots per burst.
•
Enter/Exit the Programming Mode
– To Enter or exit the programming mode you must first press and hold the Mod
Button and within 2 seconds press and hold both the left and right triggers. Continue to hold all three for 5 seconds. You
will see the player 4 LED flash on for 2 seconds them go out. You have now entered or exited the programming mode
and can release both triggers and the mod button.
•
Change Rapid Fire speed
– To change the rapid fire speed you just need to press and release the left or right trigger. The
right trigger to make the speed faster and the left trigger to make it slower. The player 4 LED will flash every time you
press the right rigger and the player 3 LED will flash every time you press the left trigger to indicate you have made a
change. Once you have reached the MIN or MAX speed the LED will no longer flash.
•
Change Burst Fire Quantity
– To change the number of shots fired with the burst fire you just need to HOLD down the
X button and while holding follow the same procedure as changing the rapid fire by pressing the left or right triggers.
•
Check Rapid Fire speed Setting
– To check the currently set rapid fire speed you only need to tap the mod button. The
player 3 Led will flash the “tens” and position and the player 4 will then flash the single digit. (example. Player 3 flashes
3 times, followed by the player 4 flashing 6 times, you are now at speed setting 36) Refer to the table on the next page for
all of the speed settings.
•
Check Burst Fire Setting
– To check the currently set burst fire setting you must HOLD the X button and while holding
X tap the mod button. The player 4 Led will flash 2-10 times to indicate the number of shots set for the burst fire.
•
Reset Current Mode to Default settings
– To reset the Rapid fire mode you are currently editing to the factory default
you must hold both the left and right triggers together for 7 seconds. After 7 seconds the player 3 and 4 LED’s will both
flash very fast for 2 seconds and the Programming mode will automatically be exited with the default settings saved. This
will set the default speed and burst fire setting for the current mode only.
