30
The plug assignment of the SPEAKON loudspeaker connections are indicated in the
following drawing:
Loudspeaker pole
Pin
Positive pole
1+
Negative pole
1-
Stereo Operation
In this operating mode, the power amplifier works with two independent channels.
Each channel has its own input (9 respectively 10), volume control (6) signal display
LED (3), limiter, protection circuit, high-power leg and also its own loudspeaker out-
put (12 respectively 13).
Put the switch SIGNAL SMART (11) to
the position "STEREO".
Connect the outputs of your audio
source (mixing table, equalizer, etc.)
with the corresponding inputs of the
power amplifier.
Connect the left speaker with the loud-
speaker connections of channel A.
Connect the outputs of your audio
source (mixing table, equalizer, etc.)
with the corresponding inputs of the
power amplifier. Connect the left chan-
nel with the input jack XLR (9) CH-A IN
respectively with the input jack plug (10)
CH-A IN.
Connect the right channel with the input
jack XLR (9) CH-B IN respectively with
the input jack plug (10) CH-B IN.
Connect the positive pole of the left
loudspeaker with the red loudspeaker
output clamp marked with "CH-A OUT
+" (13) and the negative pole of the left
loudspeaker with the black loudspeaker
output clamp marked with "CH-A OUT
–" (13).
When using the SPEAKON connections,
connect the SPEAKON line of the left
loudspeaker with the loudspeaker out-
put SPEAKON CH-A OUT (12).
35
Mains Connection
Make sure that the mains switch (5) is off prior to connecting the pow-
er amplifier to the mains supply and that the volume controls (6) are
set to minimum (all the way to the left).
Connect the earthed plug of the mains
connection (18) with an earthed power
outlet.
With the mains switch (5), you turn the
power amplifier on or off.
In position ON, the appliance is on, in
position OFF, it is turned off.
When the appliance is on, the LEDs
POWER (4) and LED V.PROTECT (19)
light up.
