12.2.1 “MD Setup - Sensitivity” Submenu
With this setting you can specify the sensitivity
that motion detection is to work at. Unimpor-
tant small movements can be ignored using a
low setting.
Button functions:
Press the “Up“”(B) or “Down” (I) button on the remote control to set the desired val-
ue.
Press the “ENTER” button (C) on the remote control to save the settings and to exit
the “Sensitivity” submenu.
12.2.2 “MD Setup - Area Setting” Submenu
This function allows you to set the area subject
to motion detection. The area within the zone
determines the motion detection area. Move-
ments outside this area will be ignored.
Button functions:
Press the “Up”(B), “Down” (I), “Left” (D) or “Right” (H) buttons on the remote control
to set the desired area size. Then press the “DEL” button (J) and then use the
“Up”(B), “Down” (I), “Left” (D) or “Right” (H) buttons on the remote control to set the
desired position of the motion detection area.
Press the “ENTER” button (C) on the remote control to save the settings and to exit
the “Area Setting” submenu.
57
