![background image](http://html1.mh-extra.com/html/conrad/19-04-86/19-04-86_operating-instructions-manual_2653769035.webp)
35
To determine the start-up sequence, we proceed as follows:
• Switch on the 16-channel running light control.
• Select the desired running light sequence with which the 16-channel running light control
should start upon activation wither with the switch at the remote control, or with the mode
button SW 2 on the board.
• To store the settings, hold down the mode button SW 2 until the LED display “LED1” is first
lit and then flashes. The light sequence is stored when the LED flashes.
Figure 8
16 - K_Lauflicht_V11
Q1
GND
UB
GND
RC
GND
TXD
RXD
SW 1 SW 2
MODE
USB TO UART
R23
C11
C10
R22
U1
U2
RESET
R21
C7
D3
R24
L1
R1
R1
LED1
5 - 18 VDC