Conrad Electronic 751549, Operating Instructions Manual

Page: 56 / 118

Activation Method 1: Activation via ID card
Activation Method 2: Activation via user code
Activation Method 3: Activation via ID card and user number
Example for activating relay output 1:
9876 #
You must be in the standby mode in order to be able to activate relay output 1.
If activated the green “PASS” status LED (4) is lit.
The factory setting allows the relay output 1 “OUTPUT 1” (F) to be activated by ID card or
user code.
Activation Method 3: Activation via ID card and user number.
☞
While the green “PASS” status LED (4) flashes it is possible to
return to the standby mode by pressing the “*” key.
9.3 Activating Relay Output 2 “OUTPUT 2” (G)
☞
Please note that this step is on the setting made, the activation is
carried out either by pushing the # button after the user code or not.
The relay output 2 can be activated by entering the user code which you set in Chapter
“8.8 Programming User Code to “OUTPUT 2” (G)”
Example for activating relay output 2:
9877 #
You must be in the standby mode in order to be able to activate relay output 2.
If activated the red “AUX” status LED (2) is lit.
54