manualshive.com logo in svg

Connexity M6501, Operating Manual

The Connexity M6501, a cutting-edge device, comes with a comprehensive Operating Manual. Easily accessible on our website, this manual is available for download, completely free of charge. Get the most out of your Connexity M6501 by accessing the user manual at manualshive.com.

Share
Download
background image

. 

 

PS8149KENAA01 

15/09/2004

 

Page 9 

Ce document est la propriété de EADS et ne doit pas être reproduit ou communiqué sans autorisation. 

This document is the property of EADS and may not be copied or circulated without authorisation. 

Figure 136: Format of PAS files .......................................................................................................... 155

 

Figure 137: Display of PAS files.......................................................................................................... 156

 

Figure 138: Restart request................................................................................................................. 157

 

Figure 139: Menu 5-2 (Configuration transfer).................................................................................... 160

 

Figure 140: Serial port configuration transfer...................................................................................... 161

 

Figure 141: Parallel transfer of the configuration ................................................................................ 162

 

Figure 142: Menu 5-3 (Connection management) .............................................................................. 163

 

Figure 143: Identification (F1) ............................................................................................................. 165

 

Figure 144: Identification (F6) ............................................................................................................. 165

 

Figure 145: Software identification (F1) .............................................................................................. 166

 

Figure 146: Software identification (F2) .............................................................................................. 167

 

Figure 147: Software identification (XL) .............................................................................................. 168

 

Figure 148: Hardware identification (F6)............................................................................................. 169

 

Figure 149: Hardware identification (example of an XL cabinet) ........................................................ 169

 

Figure 150: Hardware identification (example of an XL cabinet) ........................................................ 170

 

Figure 151: Display digital set names ................................................................................................. 171

 

Figure 152: Display digital set names (continued) .............................................................................. 171

 

Figure 153: Display digital set names (continued) .............................................................................. 172

 

Figure 154: Display digital set names (end)........................................................................................ 172

 

Figure 155: Modification of digital set names...................................................................................... 173

 

Figure 156: Voice cards of the various PBX families (F1/F2) ............................................................. 174

 

Figure 157: Menu 5-5 (Tone and announcement definition - F1). ...................................................... 174

 

Figure 158: Menu 5-5 (Tone and announcement definition - F2). ...................................................... 175

 

Figure 159: Menu 5-5 (Tone and announcement definition - F6). ...................................................... 175

 

Figure 160: Selection of tone type....................................................................................................... 176

 

Figure 161: Normal dial tone ............................................................................................................... 180

 

Figure 162: Busy tone ......................................................................................................................... 183

 

Figure 163: Call accepted tone ........................................................................................................... 183

 

Figure 164: Menu 5-5-2 (Announcements on F1)............................................................................... 184

 

Figure 165: Menu 5-5-2 (Announcements on F2)............................................................................... 184

 

Figure 166: Summary of voice cards installed in F1/F2 PBXs............................................................ 185

 

Figure 167: Menu 5-5-2 (Announcements on XL/XS/XC)................................................................... 185

 

Figure 168: Summary of voice cards installed in F6 PBXs ................................................................. 185

 

Figure 169: Select music on hold ........................................................................................................ 186

 

Figure 170: Record RAM message..................................................................................................... 186

 

Figure 171: Voice card recording duration .......................................................................................... 186

 

Figure 172: Listen to ROM messages................................................................................................. 187

 

Figure 173: Announcement message loading connection .................................................................. 188

 

Figure 174: View announcements (F1) ............................................................................................... 189

 

Figure 175: View announcements (F6) ............................................................................................... 189

 

Figure 176: Announcement distribution .............................................................................................. 191

 

Figure 177: Observe counters (F6) ..................................................................................................... 192

 

Figure 178: Reset counters (F6) ......................................................................................................... 193

 

Figure 179: Record announcements................................................................................................... 194

 

Figure 180: Definition of spoken languages........................................................................................ 196

 

Figure 181: Allocation of tones to languages ...................................................................................... 197

 

Figure 182: Allocation of tones to languages (continued)................................................................... 197

 

Summary of Contents for M6501

































































































































































































































Reviews:

No comments

Related manuals for M6501

Panasonic KX-TDE200NZ User Manual preview
KX-TDE200NZ
Brand: Panasonic Pages: 250

Brands by name

Popular brands

Load more brands