.
Page 158
15/09/2004
PS8149KENAA01
Ce document est la propriété de EADS et ne doit pas être reproduit ou communiqué sans autorisation.
This document is the property of EADS and may not be copied or circulated without authorisation.
DIRECTORY ACTION CONFIRM
NO
YES
Select YES to confirm the action on the active directory.
RESTART TYPE
STANDARD
• • • • • • • •
Select Standard as the restart type.
LOADED DATA
Read-only line indicating the data to be saved.
RESTART CONFIRMATION
NO YES
Select YES to confirm the restart: the PBX will restart automatically.
SECURISATION
Note:
This line is only displayed for the NeXspan C/S/L range.
In the NeXspan C/S/L range, you may be required to restart the system in secure mode
during update, restore, patch loading and switchover management operations from M7425
Enterprise (for further information, see the M7425 Enterprise User Manual – Basic
functions).
On NeXspan C/S/L, two versions are kept in the memory: an active version and an inactive
version. During a switchover, version N-1 is kept on the PBX as inactive version, which
makes it possible, in case of failure, to return to the previous version. When the secured
mode is started, a test phase takes place. The duration of the test period, as well as the
time remaining before software release validation, is then displayed. At the end of the test
phase, if the tests are positive, version N is validated, otherwise there is a return to version
N-1.
This line, in read-only mode, is used to view the security mode started from the
management center:
INACTIVATE
Secured restart not activated.
IMPLICIT
VALIDATION
At the end of the test phase, if the tests are positive, version
N is automatically validated.
BACKWARD
At the end of the test phase, there is automatic return to
version N-1.
