.
Page 48
15/09/2004
PS8149KENAA01
Ce document est la propriété de EADS et ne doit pas être reproduit ou communiqué sans autorisation.
This document is the property of EADS and may not be copied or circulated without authorisation.
NUM DIG.
EN 0-00: STATUS
ANAL EN 0-01: STATUS
S/T0
EN 0-02: STATUS
T0
EN 0-03: STATUS
PTX
EN 0-04: STATUS
HSCX EN 0-05: STATUS
BVF
EN 0-06: STATUS
Read-only field which indicates the position
and status of virtual cards (IN SERVICE,
DISABLED, FAULTY).
A virtual card has the same functions as an
expansion card but is installed on the CPU
card (HSCX = CP1, S/T0 = LD4).
IN SERVICE DISABLED ………...
IN SERVICE
Used to activate the virtual card in the PBX.
DISABLED
Used to deactivate the virtual card for
replacement.
………...
Used to maintain the virtual card status.
DIGITAL SETS: 4
Indicates the number of digital sets on the
CPU card.
4
Indicates the number of digital sets using the
software.
ANALOGUE SETS: 4
Indicates the number of analogue sets on the
CPU card.
4
Indicates the number of analogue sets using
the software.
ONLY TO ACCESS T0 : 0
Indicates the number of T0 accesses on the
CPU card.
0
Indicates the number of T0 accesses using the
software.
CLASS SERVICE TYPE
Note:
This line is only displayed for a configuration using both set types.
V23 DTMF
CLASS service allows analogue terminals to receive the following information about the
current call: Caller number (if there is no call offering restriction) and date and time of call
(only available in V23 mode). Select V23 for standard European class sets and DTMF for
Danish class sets.
TMS VC5402: TYPE
5402 : EXTENSION ………..
Select the right TMS type.
STAT: IN SERVICE
Field which indicates the TMS status.
The following transitions are possible:
IN SERVICE
NOT EQUIP.
DISABLED
………..