Copyright
©
2013
congatec
AG
QMX6m03
26/63
5
Connector Subsystems
The conga-QMX6 is based on the Qseven
®
standard and therefore has 115 edge fingers on the top and bottom side of the module that mate
with the 230-pin card-edge MXM connector located on the carrier board. This connector provides the ability to interface the available signals of
the conga-QMX6 with the carrier board peripherals.
1x HDMI
GPIO
SPI
CAN Bus
JTAG
Power Control
Power Management
Watchdog
I²C Bus
1x PCI Express Lane
UART
onboard RS-232
Gigabit Ethernet
1x Serial ATA
4x USB 2.0
1x USB OTG
SDIO/MMC/MicroSD
I²S Audio
LVDS
