Congatec conga-IA3 User Manual Download Page 72

Page: 72 / 82

2015

congatec

IA30m10

72/82

8.4.24

Security Configuration

Feature

Options

Description

TXE

Enabled

Disabled

Enable Trusted Execution Engine.

TXE HMRFPO

Enable

Disable

Enable Host ME Region Flash Protection Overwrite.

TXE Firmware Update

Enabled

Disabled

Enable Firmware update.

TXE EOP Message

Enabled

Disabled

Enable TXE End of Post Message.

TXE Unconfiguration Perform

No option

Execute a TXE unconfiguration command

Intel(R) Anti-Theft Technology
Configuration

No option

Intel(R) AT

Enabled
Disabled

Enable Anti-Theft technology.

Intel(R) AT Platform PBA

Enabled

Disabled

Enable Anti-Theft Platform Pre-boot Authentication.

Intel(R) AT Suspend Mode

Enabled

Disabled

Enable Anti-Theft Suspend Mode.

8.4.25

Intel(R) Ethernet Connection I210 Submenu

At this submenu additionally to its title the MAC address is displayed at the end of the title.

Feature

Options

Description

►

NIC Configuration

submenu

Opens the NIC Configuration submenu.

Blink LEDs

0-15
Default :

The Ethernet LEDs will blink so many seconds long as entered.

UEFI Driver

No option

Displays the UEFI Driver version.

Adapter PBA

No option

Displays the Adapter PBA.

Chip Type

No option

Displays the type of the Chip in which the Ethernet controller is integrated.

PCI Device ID

No option

Displays the PCI Device ID of the Ethernet controller.

Bus:Device:Function

No option

Displays the PCI Bus:Device:Function number of the Ethernet controller.

Link Status

No option

Displays the Link Status.

MAC Address

No option

Displays the MAC Address.

Summary of Contents for conga-IA3

















































































Search results

Summary of Contents for conga-IA3

Reviews:

Related manuals for conga-IA3

Brands by name

Popular brands

Congatec conga-IA3, User Manual

Search results

Summary of Contents for conga-IA3

Reviews:

Related manuals for conga-IA3

Brands by name

Popular brands