Copyright
©
2015
congatec
AG
IA30m10
55/82
8.4.1
Watchdog Submenu
Feature
Options
Description
POST Watchdog
Disabled
30sec
1min
2min
5min
10min
30min
Select the timeout value for the POST watchdog.
The watchdog is only active during the power-on-self-test of the system and provides a facility to prevent errors during boot
up by performing a reset.
Stop Watchdog for
User Interaction
No
Yes
Select whether the POST watchdog should be stopped during the popup of the boot selection menu or while waiting for
setup password insertion.
Runtime Watchdog
Disabled
One-time Trigger
Single Event
Repeated Event
Select the operating mode of the runtime watchdog. This watchdog will be initialized just before the operating system starts
booting.
If set to ‘One-time Trigger’ the watchdog will be disabled after the first trigger.
If set to ‘Single Event’, every stage will be executed only once, then the watchdog will be disabled.
If set to ‘Repeated Event’ the last stage will be executed repeatedly until a reset occurs.
Delay
Disabled
10sec
30sec
1min
2min
5min
10min
30min
Select the delay time before the runtime watchdog becomes active. This ensures that an operating system has enough time
to load.
Event 1
ACPI Event
Reset
Power Button
Select the type of event that will be generated when timeout 1 is reached. For more information about ACPI Event, see note
below.
Event 2
Disabled
ACPI Event
Reset
Power Button
Select the type of event that will be generated when timeout 2 is reached.
Event 3
Disabled
ACPI Event
Reset
Power Button
Select the type of event that will be generated when timeout 3 is reached.
