Copyright
©
2015
congatec
AG
IA30m10
58/82
Feature
Options
Description
Force LVDS Backlight
No
Yes
Force LVDS Enable and LVDS VDD Signals unconditionally
Inhibit Backlight
No
Permanent
Until End Of POST
Decide whether the backlight on signal should be activated when the panel is activated or whether it should
remain inhibited until the end of BIOS POST or permanently.
LVDS SSC
Disabled
Enabled
Configures LVDS Spread Spectrum Clock Modulation (SSC) depth. It uses center spreading and a fixed
modulation frequency of 32.9khz.
8.4.3
Hardware Health Monitoring Submenu
Feature
Options
Description
CPU Temperature
No option
Displays the actual CPU Temperature in °C.
Board Temperature
No option
Displays the actual module board temperature in °C.
TS AMBIENT DXP
No option
Displays the actual module environment temperature in °C.
DIMM DXP
No option
Displays the actual module DIMM DXP Temperature in °C.
3.3V Standard
No option
Displays the actual voltage of the 3.3V standard power supply.
5V Standby
No option
Displays the actual voltage of the 5V standby power supply.
12V Standard
No option
Displays the actual voltage of the 12V standard power supply.
VCORE
No option
Displays the actual voltage of the VCORE power supply.
System Fan Speed
No option
Displays the actual System Fan Speed in RPM.
CPU Fan Speed
No option
Displays the actual CPU Fan Speed in RPM.
System Fan Mode
Smart Mode
PWM Mode
Configures the System Fan Mode
System Fan PWM Speed
Setting
0%, 10%, 20%, 30%, 40%,
50%, 60%, 70%, 80%, 90%,
100%
Select minimum/start fan speed to be set when the start temperature of the control slope is reached.
CPU Fan Speed Mode
Smart Mode
PWM Mode
Configures the CPU Fan Speed Mode
Minimum Fan Speed
0%, 10%, 20%, 30%, 40%,
50%, 60%, 70%, 80%, 90%,
100%
Select minimum/start fan speed to be set when the start temperature of the control slope is reached.
