![Condair GS 120 OC Installation, Commissioning And Service Instructions Download Page 55](http://html1.mh-extra.com/html/condair/gs-120-oc/gs-120-oc_installation-commissioning-and-service-instructions_2651722055.webp)
55
Removal and installation of the igniter and the flame sensor
Caution!
When replacing the igniter and the flame sensor, use only the set of spares “burner
spare parts subject to wear” available from your Condair supplier, since otherwise the humidifier
could be damaged.
1. Take the humidifier out of operation, as described in chapter 7.4.
2. Undo the brackets and open the right side panel(s).
3. Disconnect the wiring connection to the igniter and to the flame sensor.
4. Unscrew the fixing nuts for the igniter and the flame sensor. Now carefully remove the igniter and
flame sensor.
Caution!
The silicon carbide igniter is breakable. Therefore handle it with great care to avoid
damage.
Reinstallation is achieved by following the reverse sequence. Inspect gaskets and replace if defective.
Make sure that all gaskets are inserted correctly and all cables are connected correctly.
Summary of Contents for GS 120 OC
Page 2: ......
Page 69: ...69 Notes...
Page 70: ...Notes...
Page 71: ...Condair Ltd Printed in Switzerland Technical modifications reserved...