ENGLISH
38
Connecting the Power Cable
When the unit is connected to your Audio/Video equipment, you can connect the power supply to the unit.
•
Connect the included power supply to the unit and to a free wall socket.
•
Set the main power switch on the back of the unit to ‘
I
’ to power the unit.
The unit will now turn on.
When the unit is powered and operational, the Navigation Buttons (
7
), The Record Button (
2
) and the
Power Button (
6
) will burn Blue.
When the unit is powered and in standby, the Navigation Buttons (
7
) will burn Red. The Record Button (
2
)
and Power Button (
6
) will not burn.
Preparing the Remote Control
•
Remove the battery cap from the back of the remote control
•
Insert the included AAA batteries in the remote control.
•
Replace the battery cap on the back of the remote control.
Notes:
- The best operational range of the remote control is about 5 meters.
-
Point the remote control to the IR receiver which is embedded in the front panel of the unit.
-
The receiving angle of the IR receiver is ±30 degrees.
-
Change the batteries when they are weak or empty.
