ENGLISH
39
7. First-Time Configuration
The unit needs to be configured when you turn it on the first time.
•
Select the correct input channel on your TV where the unit is connected to. (Composite, SCART, S-Video
or Component).
Note:
From this point, the manual is based on the fact that your TV is set to the input channel of the
unit. All steps described are related to the operation of the unit.
•
Check if the main power switch on the back of the unit is set to ‘
I
’.
•
Turn on the unit with the power button on the front of the unit, or with the ‘
Power
’ button (
1
) on the
remote control.
The unit will turn on and display the menu on your screen.
Note:
The unit needs to initialize the Harddisk when it is turned on. This can take a little while. During
initializing, the message “
Please Wait...
” is shown on your screen.
Note:
The default output signal is Composite. If you are using another output for the unit, it is possible
that your screen does not show the menu. Press the ‘
Output
’ button (
20
) on the remote control to
switch the output signal of the unit.
Note:
When using the unit for the first time, the internal Harddisk must be formatted. Select ‘
Yes
’ to
format the internal Harddisk. After the format is complete, the unit can be configured and used.
When formatting the internal Harddisk, all data on the Harddisk will be erased!
The following options are available in the Main Menu:
[1] – Movies
Playback of stored records and movies.
[2] – Music
Playback of stored music.
[3] – Photos
Playback of stored photos.
[4] - AV Input
View the Audio/Video Channel.
[5] - TV Tuner Input
View Live TV.
[6] – Rec Schedule
Configure scheduled records.
[7] – Setup
Configure
the
unit.
