Concept Pro VXM4-RT16, User Manual

Page: 28 / 48

25
CONFIGURING THE VXM4
CONFIGURING THE VXM4
NORMAL RECORD
RESOLUTION: For each group of 4 cameras, resolution can be set to D1, 2CIF or CIF
FRAME RATE: Frame rate can be adjusted for each camera by selecting the required rate from the
drop down box
QUALITY: Image quality can be selected for each camera by selecting the required quality from the
drop down box.
AUDIO: Any of the 4 audio inputs can be assigned to any of the 16 channels
USED FPS: For information only and displays used frame rate and total frame rate available for each
channel.
Note: for each group of 4 cameras, at D1, 25FPS are available, at 2CIF, 50FPS are available and at
CIF, 100FPS are available. If the operator attempts to exceed the maximum available frame rate, the
VXM4-RT16 will display an error. If this occurs, either lower the frame rate for a particular channel or
lower the recording resolution for a camera group
Note: When normal record is set to DAILY, recording parameters are the same for every day of the week. When set to WEEKLY, recording
parameters can be set for each day of the week by clicking on each day to the right of the setup screen.
SCHEDULE
The schedule allows the operator to define recording criteria for each channel on an hour by hour
basis. To define the criteria, use the mouse to highlight a single block or group of blocks on the
schedule screen and right click to choose:
TIMER REC: Continuous recording
ALARM REC: Recording only after an alarm trigger defined by EVENT LINK in the record mode setup
MOTION REC: Recording only on motion detection
USER DEFINED REC: Recording only after a user event defined by EVENT LINK in the record mode
setup
ALARM OR MOTION REC: Recording either after an alarm trigger defined by EVENT LINK in the
record mode setup, or motion detection:
RECORD OFF: No recording
Once all parameters and the schedule have been defined, it is possible to save all the settings in a
recording template by clicking SAVE AS TEMPLATE and using the virtual keyboard to define a new
template name and clicking SAVE.
This way, it is possible to define several recording templates which can be loaded by clicking LOAD
TEMPLATE as required.