Concept Pro VXM4-RT16, User Manual

Page: 22 / 48

19
CONFIGURING THE VXM4
CONFIGURING THE VXM4
DISPLAY : MAIN DISPLAY SEQUENCE
Allows the operator to define complex sequences for the main monitor output.
NAME: Use the virtual keyboard to define a name for the sequence.
Note: to choose which sequence will run, click the spot next to the sequence name
DWELL TIME: Defines the time between each sequence operation
SEQUENCE CONFIGURATION: Up to 16 sequence configurations can be configured. These can be
a mix of single screen and multi screen displays, and are based on the templates defined in Display
> Screen template
QUAD SCREEN: By selecting a quad screen and clicking the modify icon, the camera assignment for a
particular quad screen template can be changed.
DISPLAY : SCREEN TEMPLATE
For example, to change a quad template to display cameras 4,7,13 & 15, click the number 4 in the
'CHANNEL' box and then click one of the 4 squares below to assign camera 4 to the desired position.
Repeat the above steps for cameras 7,13 & 15 and use the virtual keyboard to change the description of
this template if necessary.
Click OK to save
Additional quad screen templates can be created by clicking the add icon, and templates that are no
longer required can be deleted by clicking the delete icon
The steps above can be repeated to define templates for 9 split, 7+1 split and 16 split displays
To add a new sequence screen, right click in the SEQUENCE CONFIGURATION box, move the
mouse to choose a screen layout and then click one of the available screen template options.
Note: holding the mouse over a screen template option will display its description and the channels
that have been assigned.
To delete a sequence screen, right click in the SEQUENCE CONFIGURATION box and click the
delete icon
To delete an entire custom sequence, highlight it with the mouse and click the delete icon at the
bottom of the screen