Concept Pro VXM4-RT16, User Manual

Page: 19 / 48

16
CONFIGURING THE VXM4
CONFIGURING THE VXM4
ALARM / EVENT : STORAGE
Determines whether particular storage events will trigger an alarm condition
File System Event: When enabled, an alarm condition is triggered when the VXM4-RT16 disk
becomes full. Note this condition will only be triggered when the disk is set to WRITE ONCE in
storage setup
Smart Event: When enabled, the VXM4-RT16 monitors the status of the hard drives and will trigger
an alarm if hard drive problems are developing. The check period can be adjusted as necessary
Up to 32 user defined alarm events can be defined. A user defined alarm event can help to reduce
false alarms.
For example, a user defined alarm event might be set to motion detection on channel 1 and alarm
input on channel 1. An alarm event will only be triggered when both these criteria are met.
ALARM / EVENT : USER DEFINED
To configure a user defined alarm event, highlight the number to change and double click to display
the event editor
If required, enter a description for the user defined event using the virtual keyboard.
To build the user defined event, click on the appropriate icons at the bottom of the event editor. Each
time an item is clicked, it is added to the condition list.
If any event is added by mistake, click the event again to remove it.
When the event criteria have been fully defined, click OK to save and return to the user defined event
setup screen.
To enable user defined events, ensure that the appropriate boxes are ticked.