back into the base of the steamer. The gurgling will stop when the
excess moisture inside the nozzle and hose has had a chance to
flow back into the base of the steamer.
If you steam with the hose upside down, condensation will collect
inside the hose. This will cause gurgling and some water droplets
to form near the steam jets on the handle. To avoid this, frequently
lift the steam handle upward until the hose is extended to full
height.
TO STEAM DRAPES AND CURTAINS
Wash and dry as directed in the instructions of your drapes and
curtains. Re-hang drapes/curtains and then steam when in place.
CLEANING, STORING AND MAINTENANCE
1. Turn the product off by flicking the on/off LO/O/HI switch to the
‘O’ off position. Unplug from the power outlet.
2. Wait for the steamer to cool completely for at least 30 minutes.
3. Coil power cord loosely around the appliance.
4. Remove the steamer hose as per instructions in ‘Step 2 –
Attaching the Steamer Hose’.
5. Remove the water container from the base of the steamer.
Unscrew valve and spring assembly and empty unused water.
Allow to air dry.
6. Remove excess water from the reservoir in the base of the
steamer by lifting the unit and pouring into a sink.
7. Replace water container.
8. Store the unit in an upright position.
9. To compact the steamer for more convenient storage,
simply:
a) remove the hanger
b) unclip the extendable telescopic pole and secure
to its’ shortest height by re-clipping the white clip
c) rotate the bottom rod with pant clips so that it is
vertical and in-line with the pole
d) secure the hose in a circle and place the back of the nozzle