To attach the 2-in-1 lint and bristle brush to the nozzle, simply align
the bottom of the attachment with the bottom of the nozzle. Push
the top of the attachment forward until it clicks into place. The
2-in1 lint and bristle bush should then be attached to the nozzle
and is now ready to use.
To remove, simply unclick the top of the attachment and pull away
from the nozzle.
To attach the press attachment to the nozzle, turn the attachment
upside down so that the clip on the attachment is closest to the
handle of the nozzle. Align the bottom of the attachment with the
bottom of the nozzle. Push the attachment up until it clicks into
place. The press attachment should then be attached to the nozzle
and is now ready to use.
To remove, hold the clip on the bottom of the attachment and pull
away from the nozzle.
USING THE STORAGE HOOK
The storage hook included with this steamer has two uses:
1. Use it to hold the steamer nozzle when changing
garments on the hanger. Simply hook the back of the
nozzle onto the side of the storage hook.
Be careful when placing the steam nozzle
on this hook as steam will still be emitting from the
steamer, when the steamer is switched on. Always
attach and remove the steamer nozzle by handling
the cool-touch handle.
2. Use it as a storage hook to hold the two attachments
when not in use.
(Fig.K )