Assembling the Telescopic Pole, Pant Clip System and 360°
Rotatable Hanger
Step.1 Loose the existing grooved plastic connector from the base of
the steamer
Step.2 Insert telescopic pole, marked ‘1’ (with open hole facing down)
into the connector and receptacle in base of the steamer (Fig.B).
Slide the pole into the base of the steamer and twist into place,
and then push the pole down as far as it can go, until it clicks
into place. Screw tighly the grooved connector into place.
Step.3 Unscrew the grooved connector attached to the metal
rod with pant clip system. Slide the pant clip system to
the desired position.
(Fig.B)
(Fig.A)