with the handle and turn upside down.
2. Unscrew the valve and spring assembly cap in the centre of the
container.
3. Fill water container by holding the container under a source of
cold water. Only use clean water for filling the steamer. In hard
water areas, we recommend the use of distilled water.
There is no need to fill with warm or hot water, as the steamer
heats the water while producing steam.
NB - NEVER USE ADDITIVES SUCH AS SALT, PERFUME OR DYE
WITH THIS STEAMER. THESE SUBSTANCES WILL CORRODE OR
CLOG THE INTERNAL PARTS OF THE STEAMER.
4. Fill the container to the desired level. Use the measurements on
the side of the water container as a guide. Each measurement
indicates the time length of steam the garment steamer will
provide if it is filled to that level. Do not overfill the container.
NB – the total capacity of the water container is 2.5 litres.
5. Screw the valve and spring assembly cap back onto the water
container and return the container to the upright position.
6. Place the water container into reservoir in the base of the steamer
and ensure that it is seated properly in the cavity.
OPERATING THE STEAMER
1. Ensure that the steamer is assembled correctly and that the hose
is connected securely to the base of the steamer.
2. Ensure that the on/off ‘LO/O/HI’ switch is set to the ‘O’ position.
3. Plug the steamer into a suitable power outlet.
4. This steamer features a duo power control with two settings:
I. Normal (LO) setting – 1200 watts of power. Ideal for steaming
cotton, polyester, nylon, silk and delicate non-iron fabrics.
NB – THIS IS THE STANDARD SETTING.
This setting provides 100 minutes of continuous steam.
II. Pro-steam setting (HI) – 1500 watts of power.
Ideal for steaming denim, wool, cashmere and heavier garments,
bedding and linen, home furnishings and upholstery. This advanced
setting combined with a cloth cover is also ideal for steam cleaning
hard surfaces such as windows, benchtops and flooring.