![background image](http://html.mh-extra.com/html/conair/18-series/18-series_user-manual_2649458145.webp)
1 2 . Tr a n s p o r t , l i f t i n g a n d s t o r a g e
The machine should be transported by trained personnel.
The machine is delivered packed in protective plastic foil, fixed to a transport pallet
with straps.
Unpacking and receiving inspection
• Check that the machine has not been damaged during transport.
NOTE:
Report any damage to the forwarding agent.
• Do not unpack the machine before it has been transported to where it is going to
be used.
• Check with the delivery note that the delivery is complete.
Lift and transport to place of use by means of a fork-lift truck
The machine should be lifted and handled by means of a fork-lift truck
which has extended long forks.
NOTE:
The machine must not be lifted by using lifting straps!
The machine weighs incl. packaging, approx. 3250 - 4000 kg, see also “Technical
specification”, section 2
.
Space requirements, see Layout, section 10.
The hopper and doors must be properly closed before lift and transport.
OBSERVE! The weight point of the machine is unequal!
The front side of the machine (door side) is normally heavier than the rear side.
The machine is normally lifted from front side, but depending on the granulator:
• motor size, manufacture and weight
• type of hopper
• possible optional equipment
the weight of the machine and
distribution of weight varies.
On delivery shows signs on the
machine from which side
and how the machine can be lifted.
IMPORTANT!
Two yellow signs
shows the positions for the truck
forks during lift.
(continued)
NOTE:
Then shows at least
one additional sign, the
shortest permissible fork
length and the weight of the
machine.
1 2 - 2
l Tr a n s p o r t , L i f t i n g , a n d S t o r a g e