Comtrend Corporation WAP-5813n User Manual Download Page 9

Page: 9 / 76

2.2

LED Indicators

The front panel LED indicators are shown below and explained in the following table.
This information can be used to check the status of the device and its connections.

LED

Color Mode

Function

The wireless module is ready.
(i.e. installed and enabled).

Off

The wireless module is not ready.
(i.e. either not installed or disabled).

WLAN

Green

Blink

Data transmitting or receiving over WLAN.

An Ethernet Link is established.

Off

An Ethernet Link is not established.

LAN 1X-4X Green

Blink

Data transmitting or receiving over LAN.

On WPS

enabled.

Off WPS

disenabled.

WPS

Green

Blink

The router is searching for WPS clients.

An Ethernet WAN Link is established.

Off

An Ethernet WAN Link is not established.

WAN

Green

Blink

Data transmitting or receiving over Ethernet WAN.

IP connected and no traffic detected. If an IP or
PPPoE session is dropped due to an idle timeout, the

light will remain green if an ADSL connection is still
present.

Off

Modem power off, modem in bridged mode or ADSL
connection not present. In addition, if an IP or

PPPoE session is dropped for any reason, other than
an idle timeout, the light is turned off.

Green

Blink

IP connected and IP Traffic is passing thru the device

(either direction)

INTERNET

Red On

Device attempted to become IP connected and failed

(no DHCP response, no PPPoE response, PPPoE
authentication failed, no IP address from IPCP, etc.)

The device is powered up.

Green

Off

The device is powered down.

POWER

(logo)

Red On

POST (Power On Self Test) failure or other
malfunction. A malfunction is any error of internal
sequence or state that will prevent the device from

connecting to the DSLAM or passing customer data.

Summary of Contents for WAP-5813n













































































Search results

Summary of Contents for WAP-5813n

Reviews:

Related manuals for WAP-5813n

Brands by name

Popular brands

Comtrend Corporation WAP-5813n, User Manual

Search results

Summary of Contents for WAP-5813n

Reviews:

Related manuals for WAP-5813n

Brands by name

Popular brands